HOW TO FIX THE EPSON PRINTER ERROR CODE 0X10

The Epson brand is considered to be one of the largest manufacturers of computer hardware like printers around the world. It is a mainstream brand with much of its emphasis is on home printing.

Few of the common problems faced by the users of the printer, is the Error code 0x10. Epson printer error code 0x10 states or describes on the printer that the scanner of the printer is malfunctioning. Several users have informed getting an “error code: 0x10” while trying out their new Epson printer. Few users have even reported that they get this error on their old Epson printer as well.

The Sources of Epson Error Code 0x10:

Here’s a quick overview of the possible causes of this particular error code:

• When certain particles such as dust, insects or objects get stuck inside the printer, there are chances for it to lead to this error. As an outcome, it hinders the scanning mechanism of the machine.

• Congestion or Disruption of the scan head assembly or the logic board failure of the machine can also lead to this error code.

• In certain aspects, a core or hardware defect can be the main cause of Epson error.

• The scanning could fail due to a faulty scanner and as a result, this error code pops up. Incompatible or damaged printer drivers are some other reasons for this issue.

Steps to Fix Epson Error Code 0x10:

Go through the steps suggested below and try them out to resolve this particular issue. An obstruction on the scanner can also be the issue for this error.

Step 1: Do a physical review of the printer first.

Step 2: Raise the cover of the scanner and search for small bits of papers or particles with the help of a flashlight. This will help to see the inside of the printer clearly.

If any undesirable particle is found, remove it carefully and throw it. Else, it can lead to fatal effects or can completely destroy the scanner of your printer.

Step 3: Lastly restart the printer and if you still persist to get this error code, resetting of the printer is needed.

Steps to Reset the printer:

Step 1: Detach the Epson printer from the power source and wait for some time.

Step 2: Press and hold the power button of your printer for at least a minute and keep holding.

Step 3: Connect the printer to the power source again.

Step 4: Restart the printer and try to scan a document. (If the scanning is still not proper or disrupted, it means that it has not fixed the error yet.

Steps to change the Printer driver:

If this error occurs due to an incompatible or faulty printer driver, then it is suggested to change the printer driver.

Step 1: To change the driver, turn on both the computer and your printer.

Step 2: Put your computer on automatically download the driver software.

Step 3: Find your Windows for installation settings and then choose the ‘Change device installation settings’ option in it.

Step 4: Hit the ‘Yes’ button and save the changes.

Step 5: Attach your printer to the computer and let Windows find a compatible driver.

If Windows get such a driver, it will automatically download and install it on your computer.

Internal or hardware defect

There are numerous tools that are available on the internet to resolve internal or hardware issues. It can be downloaded and used to resolve Epson error code 0x10. However, if you are unsure of the dependability of these specific tools, then Epson tech experts help should be considered.

Conclusion

This error code indicates a fault in the scanner area of the printer. The Epson Printer error code 0x10 of the machine could be caused because of various reasons.  When the scan mechanism gets jammed or another internal hardware fault it destroys the smooth working of the machine. Power or electrical surges or even improper printing can cause this to this printer error. Hence, it is important to be conscious of the origin of this error, mainly to avoid same over and over again.